If you own a refrigerator for commercial use, then it is pivotal to get its condenser coil coated on a periodic basis in order to avoid corrosion and complete malfunction of the equipment.
How Does a Condenser of a Commercial Freezer Work?
The condenser of a commercial freezer is an integral part of the refrigeration cycle. The refrigerant passes from the compressor to the condenser.
The condenser of a commercial freezer is an integral part of the refrigeration cycle. The refrigerant passes from the compressor to the condenser.
Why Should a Condenser Be Coated?
The condenser of your refrigerator for commercial use is vulnerable to corrosion, particularly if the equipment is placed in a harsh environment, for instance, anywhere near the ocean. Similarly, several other chemicals, high humidity and constant exposure to moisture are just as potent at causing substantial damage to the coils, thereby distorting the entire refrigeration cycle for your refrigerator for commercial use.
Amongst the myriad of adverse effects of the corrosion of condenser coils are:
- Reduction in the efficiency of the condenser and the refrigerator as a whole.
- Higher energy consumption leading to higher bills
- Complete damage to the condenser coils, necessitating the replacement of the component and, in some cases, the entire commercial freezer unit
There is one easy solution to address the issue, however. You can get the condenser of your commercial freezer coated with a corrosion protection system so as to prevent any corrosion and the potential need for repair or replacement of the component.
Not only can such an approach increase the life of your refrigerator for commercial use, but it can also reduce maintenance costs and increase the efficiency of the unit. It is, therefore, a no-brainer to get your commercial freezer’s condenser coated on a periodic basis.
There are various types of coatings you can choose from on the basis of the design and make of the refrigerator, including polyurethane, epoxy phenolic, and silica.
When Should You Get Your Commercial Freezer’s Condenser Coated?
As a rule, condenser coils in your refrigerator for commercial use should be checked every month for signs of dust, dirt and debris. For commercial freezers in kitchens, you also need to check for the build-up of grease. Regular cleaning and degreasing of the condenser coils do protect them from corrosion; however, you still need to get them coated for proper maintenance.
If your commercial freezer is in a shop or facility that has proximity to the ocean or in a region with high humidity or is exposed to moisture, then you must get its condenser coils checked for corrosion on a bi-annual basis, at the very least.
Coating for condensers is not a one-time solution and subsequent layers of coating may be required in due course, which is why it is important to get expert assistance for the equipment once every six months.
Do Not Procrastinate Your Freezer’s Condenser Coating
Since the condenser for a commercial freezer is critical to its functioning, it is important that it is protected from corrosion. Hence you must get the condenser coils checked and coated with the relevant material.
To accomplish this task, you can seek the services of commercial refrigerator suppliers such as Western Equipments, and get access to expert assistance.
